• High Pressure Pumps

  • Introducing the Ultra High Pressure Water Pump:

    • Here in the Middle East with its arid desert climate and rapidly growing urban population, access to clean, safe drinking water is critical.
    • Whether for residential, commercial, or industrial use, effective water treatment requires the best equipment.
    • UltraTEC is pleased to introduce its line of high-pressure water pumps, purpose-built for moving and pressurizing water at any stage of the purification workflow.
    • As the engine powering all downstream processes from filtration to reverse osmosis, UltraTEC pumps excel at consistently delivering high volumes under pressure - the lifeblood of any treatment plant.

    Robust Centrifugal Design

    UltraTEC pumps utilize a robust centrifugal pumping principle. Water enters the suction inlet and is accelerated by the spinning impeller to discharge at higher pressure out the outlet. Our pumps feature cast iron housings and stainless steel wetted components for maximum corrosion resistance under the region's tough water conditions.

    Wide Flow Rate Range

    Models are available from 0.5 m3/hr up to 400 m3/hr, allowing use from small residential RO systems all the way to mega-municipal waterworks. Multistage centrifugal configurations boost pressure further for high-rejection membrane processes.

    Variable Speed Control

    Intelligent variable frequency drive controls precisely regulate flow rates and pressures. Soft starts safeguard mechanical components while smoothing out fluctuations. Remote monitoring via PLC interface tracks operation.

    Energy Efficiency

    Premium motor and hydraulic efficiencies maximize performance for minimal energy use. IE3 or above motors meet MEWREE standards. Sensors tap performance data to optimize system-wide efficiency via integrated control schemes.

    Robust Construction

    All wetted components withstand pressures up to 16 bar/1600 kPa. Reinforced cast iron or stainless steel housings protect internals. Mechanical seals prevent leaks. Cataphoresis epoxy coating resists corrosion in water and wastewater environments.

    Ease of Maintenance

    Cartridge-style mechanical seal spares drop in for swift replacement. Impellers, casing wear rings, and other components employ standardized dimensions aiding routine maintenance cycles without specialized tools or expertise.

    Applications

    • RO membrane feed pumps
    • Filtration process pumps
    • Water transfer / booster pumps
    • Wastewater recycling pumps
    • Irrigation & agricultural pumps
    • Fire suppression pumps
    • Cooling tower circulation
    • Sewage and sludge transfer

    With a full range of flow rates, hydraulic specifications, and optional variable speed control, UltraTEC centrifugal pumps satisfy any high-pressure water transfer or circulation duty. Contact UltraTEC today to discuss custom-engineered solutions for your purification or industrial water treatment applications. Rely on our pumps as the driving force for a sustainable water future in the UAE.




  • ERD(Energy Recovery Device):

    AE Turbocharger is an efficient and cost effective solution for recovering the wasted energy in a R.O. system. With AE Turbocharger up to 80% of wasted energy can be recovered as well as the initial capital of the R.O system is also reduces by smaller high pressure pump and the throttle valve is also not required if the AE Turbocharger is installed.




  • GRUNDFOS (Made in Hungary)

    gandfous-high-pressure-ppumps




  • DANFOSS (Made in Denmark)

    denfoss-high-pressure-pumps.html

As the largest supplier of water and wastewater treatment equipment in the UAE, UltraTEC is proud to represent Danfoss, a global leader in pump technologies. For over 75 years, Danfoss has manufactured high-quality pumps trusted worldwide for dependable, energy-efficient performance. Their state-of-the-art facility in Nordborg, Denmark now supplies UltraTEC with Danfoss quality, locally serviced for UAE projects.


Product Range


Danfoss Denmark produces a comprehensive range of pumps for municipal and industrial water handling needs:

  • Circulation pumps for HVAC applications up to 45 kW
  • Submersible borehole and sewage pumps from 1-25 Hz frequency control
  • Self-priming multi-stage booster systems for waterworks
  • Circulation pumps for heat exchangers and cooling towers
  • Macerators and grinder pumps for wastewater applications
  • Diaphragm dosing pumps for precise chemical injection

Design Features


Danfoss pumps achieve best-in-class hydraulic and motor efficiency through innovations including:

  • Energy-saving EC motor technology (IE4/IE5 compliant)
  • Variable speed control optimized for local utility rates
  • Hermetically sealed motors for corrosion resistance
  • Service-friendly cartridge mechanical seals
  • Modular wetted parts for easy maintenance

Performance and Durability


All Danfoss pumps are engineered to the highest standards and undergo rigorous quality testing before export, including functionality, pressure, and longevity endurance. Models offer 10-year warranties and meet ISO, NSF, and AWWA standards for assured reliability.






  • EBARA (Made in Italy)

    ebara-high-pressure-pump-for-ro

UltraTEC is pleased to represent EBARA, an internationally acclaimed pump manufacturer based in Pesaro, Italy. For over 70 years, EBARA has combined Italian craftsmanship with advanced engineering to produce high-quality, energy-efficient pumps trusted worldwide. Their European-made models now provide UltraTEC customers with exceptional value and reliability.


A Range of Engineered Solutions


EBARA Italy fabricates the following tailored to your application needs:

  • Centrifugal pumps from 0.5 kW to 500 kW for water transfer & boosting
  • Self-priming pumps for dewatering and irrigation needs
  • Vertical multistage pumps for pressure boosting
  • Monobloc and end-suction pumps for industrial usage
  • Submersible borewell pumps for efficient groundwater extraction
  • Chopper pumps for sewage handling

Cutting-Edge Technology


EBARA designs incorporate:

  • Premium synchronous and asynchronous motors for maximum efficiency
  • VFD Variable speed control optimized for electricity cost savings
  • Canned motor technology preventing liquid intrusion
  • Corrosion-resistant coatings for chemical compatibility
  • Cartridge mechanical seals for easy on-site servicing

Rigorous Manufacturing Standards


All EBARA Italy pumps feature:

  • Dynamically balanced impellers for prolonged bearing life
  • Finite Element Analysis (FEA) optimized components
  • Full functional testing before export
  • Welded construction certified for strength and reliability
  • Motors meeting IE3/IE4/NEMA premium efficiency standards

Ensured Support


With UltraTEC representing EBARA, customers can rely on comprehensive support services to ensure the optimal performance and longevity of their pump systems.






  • LOWARA (Made in Italy)

    lowara-high-presser-pumps-Dubai-UAE

UltraTEC is proud to represent Lowara, one of Italy’s most prominent pump manufacturers. For over 50 years, Lowara has combined Italian craftsmanship, stringent quality control and hydraulic expertise into globally recognized pumping solutions. Now, UltraTEC customers can rely on Lowara’s engineered performance for critical water handling projects throughout Dubai.


A Full Solution Provider


Lowara’s Bergamo facility produces:


  • End suction centrifugal pumps up to 450 m3/hr
  • Vertical turbine pumps for pressure boosting
  • Self-priming and self-cleaning pumps
  • Circulator pumps for HVAC and industrial processes
  • Submersible wastewater pumps for sewage manifolds
  • Multistage pumps for high-pressure dosing

Cutting-Edge Engineering


Precision manufacturing techniques include:


  • CNC machining for dynamically balanced components
  • Finite Element Analysis optimized designs
  • Hard chromium plated or cataphoretic coatings
  • Cartridge mechanical seals and bearings
  • Motors meeting IE4 super-premium efficiency

Rigorous Quality Standards


All Lowara pumps undergo extensive factory tests and feature:


  • Welded construction certified for strength and longevity
  • Temperature probes for motor protection from overheating
  • Pressure and vibration sensors for predictive maintenance
  • Pressure-testing before export ensuring durability





  • SAEER (Made in Italy)

    saer-elettropumps

UltraTEC is proud to represent Saeer, an industry-leading pumping solutions manufacturer based in Genoa, Italy. For over 40 years, Saeer has combined advanced hydraulic research with Italian design excellence to develop efficient and reliable pumps for water, wastewater, and irrigation worldwide. Now, UltraTEC customers can access Saeer’s innovative technologies through locally serviced models.


Saeer’s factory produces:


  • Horizontal and vertical centrifugal pumps up to 750 m3/hr
  • Self-priming and non-self-priming models for drainage
  • Axial and mixed flow pumps for seawater desalination
  • Submersible borewell and sewage pumps
  • Industrial process pumps for HVAC, irrigation, and more

Cutting-Edge Design


Advanced CFD flow analysis and FEA stress testing optimize each model's efficiency. Features include:


  • Premium motor efficiencies up to IE5 standard
  • Corrosion-resistant super duplex stainless wetted parts
  • Cartridge mechanical seals & lubricated bearings
  • Dual asymmetric volutes for reduced NPSH needs
  • VFD variable frequency control
  • Superior construction

CNC machining and precision welding ensure construction withstands stringent field conditions. Optional modifications include:

  • Ti-lined casings for abrasive slurries
  • Hard surfacing for extended wear life
  • Dual seals for higher pressures
  • Seal and bearing chambers for easy on-site service





  • STUART TURNER (Made in UK)

    stuart-turner-feed-pumps